Building A Pegboard Shelving Unit Instead Of A Cluttered Cabinet

As more and more people start to buy things online, the number of unorganized items in their home are multiplying. This often results in an overload of clutter that makes it difficult for homeowners to find anything. Luckily, there are products like pegboards that allow you to create a neat and organized space by placing your ‘stuff’ inside them. They’re low cost, easy to install, and can be used as shelving units or lockers.

What is a Pegboard System?

A pegboard system is a great way to organize your home. Pegboard is a very sturdy and organized way to store items. It’s easy to access what you need, and it’s easy to move things around. You can also customize your pegboard system to make it look exactly the way you want it to.

How to Make a Pegboard

If you’re like most people, your cabinet space is quickly becoming cluttered. You have all the necessary tools and materials, but there’s just no way to organize them. You can’t even find the screwdriver when you need it! If this sounds like you, consider building a plastic pegboard shelf instead of a cabinet. Pegboard is a great way to organize your tools and materials, and it looks good too.

There are many ways to build a pegboard shelving unit. The first step is to decide what type of pegboard you want to use. There are three main types: wire mesh, standard lumber, and particle board.

Wired Mesh Pegboard: This type of pegboard is made from wire mesh cloth that’s been woven into a grid. It’s strong and easy to install, but it can be difficult to access the screws that hold it together.

Standard Lumber Pegboard: This type of pegboard is made from solid wood boards that are attached together with screws. It’s easier to install than wired mesh pegboard, but it can be more expensive.

Particle Board Pegboard: This type of pegboard is made from thin sheets of wood that are glued together. It’s much cheaper than the other two options and easy to install, but it’s not very strong or durable. Pegboard doesn’t come in only one type, so you should look at your options carefully before you buy.

PCBs and Brackets

If you’re like most people, your kitchen cabinets are a total mess. There’s always something on the counter that you can’t find, and it’s hard to tell what anything is because all the shelves are crammed together. If you’re tired of trying to search through all the clutter, consider building a pegboard shelving unit instead.

Pegboard shelving units are simple to construct and can be customized to match your kitchen’s style. You can build one from scratch or buy a pre-made unit, but either way you’ll need some basic supplies. First, you’ll need plywood sheets measuring about 18 inches by 24 inches. You’ll also need wood screws, washers, and nails, as well as a drill and a saw.

Once you’ve gathered your supplies, begin construction by cutting the plywood sheets into standard shelving unit sizes. For example, if you’re building a 20-inch-wide unit, cut the sheet into two 18-inch pieces. Then, use the drill and saw to create the necessary holes in each piece of plywood. Make sure you leave enough space between each hole so that you can attach the brackets later on.

Building a Pegboard Shelving Unit

There’s no need to clutter up your cabinet with knick-knacks when you can build a Pegboard Shelving Unit instead! This easy project is a great way to organize your home and make use of unused space. Here’s how to do it:

  1. Measure the space you want to use for your shelving unit and cut a piece of pegboard to that size.
  2. Place the pegboard on the ground and secure it with screws at each end. Alternatively, you can place dowel rods in the corners and screw them into the pegboard.
  3. Hang your items on the pegboard by using wire hangers or hooks. You can also use brackets to fix larger items in place.
  4. If you want, you can add some decorative touches to your Pegboard Shelving Unit. This includes painting or staining the wood, installing trim, or adding valances or railings.

DIY Clutter Solutions

If you’re like most people, your kitchen cabinets are cluttered and take up a lot of space. You might think about organizing them by type of food, but that’s just too time-consuming. A better solution is to build a pegboard shelf unit instead. Here’s how:

  1. Decide where you want the pegboard to go. It needs to be high enough off the ground so that you can store tall items on it, but not so high that it becomes a tripping hazard. If the pegboard is too low, you’ll need to use a step stool to reach the items on it.
  2. Measure and mark the location of the holes on the wall where the pegboard will go. Make sure they’re at least 1 inch wide by 1 inch deep so that screws can be easily inserted later.
  3. Purchase pegboard hooks and attach them to the wall using screws. The hooks should be spaced evenly apart so that everything has a place to hang.
  4. Measure and cut the Pegboard Shelf Unit to fit in the space marked in Step 2. Make sure all edges are even and that there’s no excess material around the hooks or screw holes.


If you’re like most people, your cabinets are cluttered and hard to use. This is especially true if you have a lot of hanging items or tools. If this sounds like you, consider building a pegboard shelving unit instead! Pegboard shelving units are easy to build and can be customized to fit your needs. Not only do they make using your cabinet much easier, but they also help declutter your home and keep it looking stylish. Thanks for reading!